Est. 1998

Image description

DECORATIVE  IDEAS

 

Interior Designer, Specialist Paint Techniques & Artist

 

Image description

Hi my name is Denise Hardy and I love everything in connection with the home i.e. Interior Design, Hand Painting Furniture, Decorative Painting Techniques and Art.

 

I live in Alicante, Spain with my husband in a beautiful villa which we both love and work hard on making it our home.  I have been established in creating beautiful homes since 1998 and never get tired of doing what I do. 




Featured on Hometalk.com

Faux Marble Dining Table - Ikea Hack

Do you ever think to yourself that you would like to change your Dining Table and  at that time you can't afford to spend a lot of money on replacing it -  or you just don't want to spend that amount of money?  Then, why not do it yourself? It is quite easy but you do need to practice quite a lot to get the effect - so try on a piece of board or something .  I am going to give you a little advice to help you along the way.


I created this marble effect on one of my friend's dining table, which was purchased from Ikea quite a few year's ago and she decided she would like a marble finish on it instead of it just being plain white and asked if I would do the work for her.  So here it is - I hope you like it?  She lives in an Apartment in Spain and she has the table on her balcony.

 

Items you will need:-


 

Zinsser BIN or 123 Primer - white

 

Acrylic Eggshell - white

 

Clear Acrylic Glaze


Artists Acrylics

 

Glazes - I mixed three and used Artists Acrylics in Burnt and Raw Umber and Raw Sienna.  You only need to mix a little of these three colours as it goes a long way.  Also add a little water to the mixes as you don't need your glaze too thick.

 

Badger Softener Brush

 

Feather

 

Sea Sponge - it is important you use a sea sponge as this gives the paint a more 'marbly' effect

 

Polyvine Acrylic Varnish

 

Sponge Roller and Tray

 

3 small mixing bowls

 

Water Spray

 

Medium and Fine Grit Sandpaper

 

 

1. Sand surface smooth with medium/fine grit sandpaper. Remove dust and grit with a tack cloth or damp rag.  Use two coats of the Zinsser primer over the surface and let it dry overnight.  Just let the primer dry after each coat.  You can apply the 2 coats in one day.

 

2.  Roll on one coat of white eggshell. Let it dry overnight.  Apply 2 coats, making sure each coat is dry thoroughly before applying the next.  Slightly sand down between coats, then you can proceed to the veining.

 

Use the sea sponge and dab in a diagonal direction just here and there, not all over.  Use your softening brush by going over it very lightly, this will help send the paint into the background.

 

To help make veining easier you could buy a small marble tile. It will help you better visualize what the veins really look like.  Veins in marble usually run on a diagonal.

 

3. The veining is created by using a feather.  I bought my feathers at the craft store, but you may find one out in nature to use.

 

4. You need to mix three colours.  The texture needs to be like cream.  Dip the tip of the feather into one of the glazes and then draw a diagonal line with the tip of the feather moving it on its side and back and forth as you draw the line. You don’t want it to be a solid line, the more variation you can give each vein in color and width – the more realistic it will look.

 

5. After you make a few veins – hold a spray or misting bottle of water about 12” away from the surface and very very lightly spray water on top of the veining.  This will blur each line, spray a bit more on a few areas to achieve larger sections of the blurrines .  If necessary, blot excess water with the sea sponge to fix mistakes or to spread out an area of veining.  If you want to spread the glaze a bit to soften a vein, go over it with the Softener brush. Gently dab it up and down over any area that needs softening.  

 

6. Use the another of the darker color of paint to accent the veins you have already made.  Using the mixes, vary the shades and width of each vein.  Mist with water and let dry.

 

Remember to continue the veining down and around the sides of the piece you are working on so the top looks like a slab of marble.   When you have all the veins and accent veins completed, let it dry.

 

7.  If you look at marble carefully you will see it has some splotchy spots in some areas. To achieve this, dip a toothbrush into the mixes of glaze.  Move your thumb over the loaded brush to create some paint splotches over some of the veins and white areas.  Let it dry overnight.

 

8. Run very fine sandpaper over the top to ensure that the veins and splotches are not raised in any area. Remove sanding grit with a tack cloth.

 

9.  Finally apply 3 or 4 coats of the polyvine varnish (I used 4 coats as it is a table and will get plenty wear and tear.  This will add a nice sheen and  protect your lovely work.  Let each coat dry well before adding the next and hey presto you have a beautiful Faux Marble Effect.

 



Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description

PINTEREST ready - Please feel free to PIN

Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description
Image description